![]() |
![]() |
| |||||||||||||||||||||||||||||
|
Activities may be standalone, or part of lessons or curricular units. TE Activity: Blood Cell Basics
Learning Objectives (Return to Contents) After this activity, students should be able to:
Materials List (Return to Contents) For each group:
For the entire class to share (optional):
Introduction/Motivation (Return to Contents) Today, we are talking about the circulatory system. The circulatory system is made up of the heart, veins, arteries and blood. Despite some misconceptions, the heart is not one big, open organ through which blood runs. Instead, it is about the size of your fist and is broken into four separate chambers ─ or rooms. There are two upper and two lower chambers. The upper chambers are called the atriums (left and right) and only receive blood from the body. The lower chambers are called the ventricles (left and right), and their task is to send blood out to the body. Most of us have had a cut before. Did you bleed? What did the blood look like? It may have looked red and felt sticky. Blood is made up of many different things: plasma (5%), water (50%), white blood cells and platelets (1%), and red blood cells (44%). The plasma is a water and salt substance that contains the blood's proteins and suspends the cells. The white blood cells are known as the army and fight off infections and diseases. Platelets are the smallest cells in the blood that form clots to stop the flow of blood in case you have an injury. Red blood cells contain hemoglobin, which is responsible for carrying oxygen to your body. Blood has many important jobs! Blood has many more red blood cells than white blood cells, which contribute to our blood's red color. Blood cells flow through the capillaries in single file so that maximum oxygen and nutrient exchange will occur. It is important for bioengineers to understand and know the amounts of cells in blood in order to understand how to help people whose circulatory system is not working properly or need blood transfusions (replacement blood) when they have lost too much blood due to severe injury or oftentimes during surgery. Unfortunately, sometimes the heart can become blocked by fat, which does not allow the blood to flow through your body. Your body needs oxygen to survive, so imagine what would happen if you could not get blood moving through your body to obtain this essential oxygen. The body's arteries can become clogged due to heart diseases, which can then cause heart attacks; engineers, therefore, work to create devices to clear such blockages. One common procedure used to clear clogged arteries is called angioplasty. During this procedure, a tiny balloon is inserted into the clogged artery and is then inflated. The artery opens, and then the doctor places a device called a stent into the artery to keep it open after the procedure is completed. This allows the blood to flow through the area of the artery that was previously blocked. Engineers also manufacture artificial blood, organs and equipment to monitor the human body. They save lives by developing better ways of administering blood transfusions (giving a person back the blood they have lost) when someone loses a lot of blood due to an injury or during surgery. They have created artificial blood, which can be used in a blood transfusion when real blood is either not available or there is not time to test for blood type. Also, engineers have developed equipment for detecting blood diseases like diabetes. Biomedical engineers design medical equipment for hospitals to take better care of patients. Have you seen a microscope? Microscopes and many other devices are designed by engineers. Can you think of other things that need special equipment to view? (Possible answers: planets, stars, tiny insects, etc.). Getting blood to all the parts of your body is the most important function of the circulatory system. In this activity, we are going to make fake blood to show the proportion of white blood cells to red blood cells. We will also see how red blood cells are very flexible because they need to fit through very small capillaries to get oxygen to every part of our bodies. After we make a model of blood today, we are going to invent ways to clean our clogged arteries, just like engineers! Procedure (Return to Contents) Day/Night Before the Activity
Before the Activity
With the Students
Part 1: Model of a blood cell
Part 2: Blood cells under a microscope (Optional)
Attachments (Return to Contents)
Safety Issues (Return to Contents) Microscopes are expensive and should not be mishandled. Remind students to not turn the knobs or attempt to remove the blood cell slide from its carriage. Slides should be handled with care, as slide edges can easily cut. Students should use caution when kneading their bags of gelatin, as the bags could pop if they squeeze too hard. Troubleshooting Tips (Return to Contents) Some students may already know the various composites of the blood. Allow them to become the experts and assist others in the class. Obviously, this activity could be very messy. The red gelatin will stain if it comes in contact with skin or clothing. Some simple precautions can help avoid a headache later, such as asking students to use a paper towel to cover their area . (This will make your sanitation engineers very happy!) Students should also be reminded of the rules when working with messy things. Keep items to yourself and clean up anything that spills. Remind student NOT to unseal their bags of gelatin. Assessment (Return to Contents) Pre-Activity Assessment Voting: Ask a true/false question and have students vote by holding thumbs up for true and thumbs down for false. Count the votes and write the totals on the board. Give the right answer.
Activity Embedded Assessment Worksheet/Drawing: Have the students draw and label their blood cell on the Blood Cell Model Worksheet; review their answers to gauge their mastery of the subject. Group Questions: During the activity, ask the groups discussion questions as directed in procedures above. Post-Activity Assessment Graphing Practice: Assess students' understanding of the concepts by assigning the Blood Cell Math Worksheet which has the students complete a pie chart on the components of blood. Problem Solving: Present the class with the following problems and ask the students to calculate the number of red and white blood cells present in the blood based on the following percentages. Use a calculator and give the students a whole number for the volume of blood. Red blood cells - 44% White blood cells - 1% Plasma - 5% Water - 50%
Student-Generated Definitions: On a white/chalk board, or designated word wall, write the four composites of the blood cell (white blood cell, red blood cell, plasma, water), and generate a class comprehensible definition. Activity Extensions (Return to Contents) Have students create a model blood cell out of modeling clay. Discuss various heart diseases that may obstruct blood flow. Have students research blood cells from other animals. Are they the same or different from human blood cells? Have students investigate what would happen if your white blood cell count increased or decreased? What would happen if your blood did not have platelets? References (Return to Contents) Fischer Scientific, fischersci.com - Catalogs, Science Education, Histology Slides for Students, http://www.fishersci.com/wps/portal/PRODUCTDETAIL?LBCID=00270973&aid=2429601 - accessed May 17, 2006. MedlinePlus Medical Encyclopedia, Red Blood Cells, Normal, http://www.nlm.nih.gov/medlineplus/ency/imagepages/1218.htm - accessed May 17, 2006. Owner (Return to Contents) Integrated Teaching and Learning Program, College of Engineering, University of Colorado at BoulderContributors Jessica Todd, Julie Marquez, Sara Born, Malinda Schaefer Zarske, Janet YowellCopyright © 2004 by Regents of the University of ColoradoThe contents of this digital library curriculum were developed under a grant from the Fund for the Improvement of Postsecondary Education (FIPSE), U.S. Department of Education and National Science Foundation GK-12 grant no. 0226322. However, these contents do not necessarily represent the policies of the Department of Education or National Science Foundation, and you should not assume endorsement by the federal government. Last Modified: August 13, 2007
K12 engineering curriculum
K-12 engineering curricula
K12 engineering curricula
K-12 engineering activities
K12 engineering activities
K-12 engineering lessons
K12 engineering lessons
Engineering for children
Engineering activities for children
K-12 science activities
K12 science activities
K-12 science lessons
K12 science lessons
| ||||||||||||||||||||||||||||||